Wet, slumped or failed insulation is making your home cold and damp. We extract every bit of it, leave the cavity clean and dry, and put the warmth back in.
Cavity wall insulation removal — also called extraction — is the process of completely taking old, damaged or water-logged insulation back out of your wall cavity. It’s our speciality, and across the North East it’s one of the most common fixes we carry out.
When cavity wall insulation was installed decades ago, the materials used — blown mineral fibre, polystyrene bead or urea-formaldehyde (UF) foam — were never designed for the battering North East walls take from wind-driven rain. Over time that insulation absorbs water, slumps down inside the cavity and bridges the gap that’s meant to keep the outside wall and inside wall separate. Instead of keeping heat in and water out, it does the opposite: it holds moisture against your inner wall and drags heat out of your rooms.
The symptoms are miserable and familiar: damp patches, black mould, cold walls, streaming windows and heating bills that keep climbing. The good news is that it’s fixable — and removing the failed material is almost always the first step to a warmer, drier, healthier home.
If you recognise two or more of these, a survey is well worth it.
Damp patches, tide-marks or black mould appearing on internal walls, especially on the weather side of the house.
Walls that feel cold and rooms that never warm up, even with the heating running.
Persistent condensation, misted windows and a musty smell caused by moisture trapped in the wall.
Heating costs climbing year on year because wet insulation has stopped doing its job.
Homes insulated with older blown fibre or UF foam that simply can’t cope with exposure.
Coastal, elevated or weather-facing homes where driving rain has got into the cavity.
Our process is careful, clean and thorough. We drill a neat, regular pattern of small holes into the mortar joints, then use powerful industrial vacuum equipment combined with compressed air to draw out every bead or fibre of the old insulation — plus any rubble and debris sitting on the wall ties. We check the cavity with a borescope as we go, so nothing is left behind.
Once the cavity is completely clear, your wall can finally breathe and dry out. From there you have a choice: leave the cavity empty (often the right call for very exposed properties) or have it re-insulated with modern, water-resistant bonded bead. We’ll give you honest advice on which is best for your home.
Finally we make good every hole, colour-matching the mortar so the brickwork looks untouched, and leave the site spotless. Most domestic extractions are completed in one to two days.
removal & extraction" loading="lazy">We'll inspect your walls inside and out, show you what's really going on with a borescope, and give you honest advice and a fixed price.